PREMIUM PYE PV250 S53H Plates 1x1 m

Application:

Recommended for installation in a non-invasive photovoltaic mounting system
For roof flashing
Top layer in multi-layer roof coverings, terraces, and balconies
Single-layer renovation of bitumen coverings

Properties:

Durable and puncture-resistant
Double SBS modification
For use in reduced ambient temperatures
Fixed by welding
Cut to size and convenient for installing brackets for photovoltaic systems
No edge strip, full-surface sprinkling, no material loss
No cutting required, saves time
Meets the guidelines/requirements set by manufacturers of non-invasive photovoltaic mounting systems regarding tear and tensile strength, as well as joint resistance to peel and shear forces

Available packaging:

1 pcs

Type of reinforcement	non-woven polyester
Top finishing	coarse grained
Low temperature flexibility	≤ -25°C
Dimension	1 m x 1 m
Thickness	(5, 3 ± 0,2) mm
Resistance to external fire exposure* *applies to the examined layer systems	B_roof (t₁ ), B_roof(t₂)
Reaction to fire	class E
Watertightness: waterproof at a pressure	≥ 10 kPa (method A) ≥ 400 kPa (method B)
Maximum tensile force: - longitudinal extension - transversal extension	1200 ± 250 N/50 mm (50 ± 15) % 900 ± 250 N/50 mm (50 ± 15) %
Reference document(s)	EN 13707:2004+A2:2009
Resistance to root penetration	NPD
Resistance to static loading	≥ 15 kg (metoda A)
Resistance to impact	≥ 1 500 mm (metoda A)
Resistance to tearing: - longitudinal - transversal	350 ± 150 N 350 ± 150 N
Resistance of the joint : - shear strength • longitudinal joint • transversal joint - tear off strength • longitudinal joint • transversal joint	850 ± 250 N/50 mm 1100 ± 250 N/50 mm 200 ± 70 N/50 mm 200 ± 70 N/50 mm
Dimensional stability	≤ 1%
Durability: flow resistance at elevated temperature	(100 ± 10)°C

The product should not raise any objections. The plates should be evenly stacked on the pallet, without creases, kinks or folds.
In addition, the substrate should meet the following requirements:
- dry substrate (without any visible traces of moisture or darkening caused by moisture),
- clean substrate (the surface is free of dust, oil stains, grease and other contaminants),
- smooth substrate (local unevenness and cavities in the surface do not exceed ± 5 mm),
- even substrate (the gaps between the surface of the substrate and a 4 m long batten placed on the concrete substrate do not exceed 10 mm),
- roof slope inclination min. 1%.
Making an insulation using NEXLER PREMIUM PYE PV250 S53H plates 1 x 1 m bituminous felt should be carried out according to the technical design, in accordance with the current building regulations and the detailed guidelines for the design and execution of insulation contained in NEXLER Insulation Systems and the Technical Data Sheet.
The bituminous felt should be installed in ambient temperatures of above 0°C, this requirement applies to the time of day and night.
Do not carry out insulation work during strong winds and precipitation.
NEXLER PREMIUM PYE PV250 S53H plates 1 x 1 m bituminous felt should be fixed by welding. As a result of heating both the substrate and the underside of the bituminous felt with a burner, the thin protective plastic foil melts, the asphalt is slightly melted and the bituminous felt sticks evenly to the substrate. An asphalt outflow of approx. 0,5 - 1 cm in width is required on each side of the welded bituminous felt.
Before use, please read the application details in the product's Technical Data Sheet.

Documents for download

Declaration of Performance

DWU_premium_pye_pv250_s53h_NX_EN2512.pdf

Technical Data Sheet

KT_premium_pye_pv250_s53h_plates_NX_EN2501.pdf

PREMIUM PYE PV250 S53H Plates 1x1 m

Documents for download

Declaration of Performance

Technical Data Sheet

Archival documents